Edit me

Airframes Reference

:::note This list is auto-generated from the source code using the build command: make airframe_metadata. :::

This page lists all supported airframes and types including the motor assignment and numbering. The motors in green rotate clockwise, the ones in blue counterclockwise.

AUX channels may not be present on some flight controllers. If present, PWM AUX channels are commonly labelled AUX OUT.

Airship

Airship

Common Outputs
  • MAIN1: starboard thruster
  • MAIN2: port thruster
  • MAIN3: thrust tilt
  • MAIN4: tail thruster
Name
Cloudship Maintainer: John Doe <john@example.com>

SYS_AUTOSTART = 2507

Autogyro

Autogyro

Common Outputs
  • AUX1: feed-through of RC AUX1 channel for prerotator (optional)
  • AUX2: feed-through of RC AUX2 channel for release device (optional)
Name
ThunderFly Auto-G2 Maintainer: ThunderFly s.r.o., Roman Dvorak <dvorakroman@thunderfly.cz>

SYS_AUTOSTART = 17002

Specific Outputs:

  • MAIN1: rotor_head_L
  • MAIN2: rotor_head_R
  • MAIN3: elevator
  • MAIN4: rudder
  • MAIN5: rudder (second, optional)
  • MAIN6: throttle
  • MAIN7: wheel
ThunderFly TF-G2 Maintainer: ThunderFly s.r.o., Roman Dvorak <dvorakroman@thunderfly.cz>

SYS_AUTOSTART = 17003

Specific Outputs:

  • MAIN2: rotor_head_L
  • MAIN3: rotor_head_R
  • MAIN4: rudder
  • MAIN5: throttle

Balloon

Balloon

Name
ThunderFly balloon TF-B1 Maintainer: ThunderFly s.r.o.

SYS_AUTOSTART = 18001

Copter

Coaxial Helicopter

Common Outputs
  • MAIN1: Left swashplate servomotor, pitch axis
  • MAIN2: Right swashplate servomotor, roll axis
  • MAIN3: Upper rotor (CCW)
  • MAIN4: Lower rotor (CW)
Name
Esky (Big) Lama v4 Maintainer: Emmanuel Roussel

SYS_AUTOSTART = 15001

Dodecarotor cox

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: motor 5
  • MAIN6: motor 6
  • AUX1: motor 7
  • AUX2: motor 8
  • AUX3: motor 9
  • AUX4: motor 10
  • AUX5: motor 11
  • AUX6: motor 12
Name
Generic Dodecarotor cox geometry Maintainer: William Peale <develop707@gmail.com>

SYS_AUTOSTART = 24001

Helicopter

Common Outputs
  • MAIN1: main motor
  • MAIN2: front swashplate servo
  • MAIN3: right swashplate servo
  • MAIN4: left swashplate servo
  • MAIN5: tail-rotor servo
Name
Blade 130X Maintainer: Bart Slinger <bartslinger@gmail.com>

SYS_AUTOSTART = 16001

Hexarotor +

Common Outputs
  • MAIN1: motor1
  • MAIN2: motor2
  • MAIN3: motor3
  • MAIN4: motor4
  • MAIN5: motor5
  • MAIN6: motor6
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
Generic Hexarotor + geometry Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 7001

Hexarotor Coaxial

Common Outputs
  • MAIN1: front right top, CW; angle:60; direction:CW
  • MAIN2: front right bottom, CCW; angle:60; direction:CCW
  • MAIN3: back top, CW; angle:180; direction:CW
  • MAIN4: back bottom, CCW; angle:180; direction:CCW
  • MAIN5: front left top, CW; angle:-60; direction:CW
  • MAIN6: front left bottom, CCW;angle:-60; direction:CCW
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
Generic Hexarotor coaxial geometry Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 11001

Hexarotor x

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: motor 5
  • MAIN6: motor 6
Name
Generic Hexarotor x geometry Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 6001

Specific Outputs:

  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
UVify Draco-R Maintainer: Hyon Lim <lim@uvify.com>

SYS_AUTOSTART = 6002

Specific Outputs:

  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
Hex X with control allocation Maintainer: Silvan Fuhrer

SYS_AUTOSTART = 6003

Octo Coax Wide

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: motor 5
  • MAIN6: motor 6
  • MAIN7: motor 7
  • MAIN8: motor 8
Name
Steadidrone MAVRIK Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 12002

Octorotor +

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: motor 5
  • MAIN6: motor 6
  • MAIN7: motor 7
  • MAIN8: motor 8
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
Generic Octocopter + geometry Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 9001

Octorotor Coaxial

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: motor 5
  • MAIN6: motor 6
  • MAIN7: motor 7
  • MAIN8: motor 8
Name
Generic 10" Octo coaxial geometry Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 12001

Octorotor x

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: motor 5
  • MAIN6: motor 6
  • MAIN7: motor 7
  • MAIN8: motor 8
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
Generic Octocopter X geometry Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 8001

Quadrotor +

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: feed-through of RC AUX1 channel
  • MAIN6: feed-through of RC AUX2 channel
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
  • AUX4: feed-through of RC FLAPS channel
Name
Generic 10" Quad + geometry Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 5001

Quadrotor H

Name
Reaper 500 Quad Maintainer: Blankered

SYS_AUTOSTART = 4040

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: feed-through of RC AUX1 channel
  • MAIN6: feed-through of RC AUX2 channel
BetaFPV Beta75X 2S Brushless Whoop Maintainer: Beat Kueng <beat-kueng@gmx.net>

SYS_AUTOSTART = 4041

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4

Quadrotor Wide

Common Outputs
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
  • AUX4: feed-through of RC FLAPS channel
Name
Team Blacksheep Discovery Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 10015

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: feed-through of RC AUX1 channel
  • MAIN6: feed-through of RC AUX2 channel
3DR Iris Quadrotor Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 10016

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
Steadidrone QU4D Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 10017

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: feed-through of RC AUX1 channel
  • MAIN6: feed-through of RC AUX2 channel
Team Blacksheep Discovery Endurance Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 10018

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: feed-through of RC AUX1 channel
  • MAIN6: feed-through of RC AUX2 channel

Quadrotor asymmetric

Common Outputs
  • MAIN1: motor1 (front right: CCW)
  • MAIN2: motor2 (back left: CCW)
  • MAIN3: motor3 (front left: CW)
  • MAIN4: motor4 (back right: CW)
  • MAIN5: feed-through of RC AUX1 channel
  • MAIN6: feed-through of RC AUX2 channel
Name
Spedix S250AQ Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4051

Quadrotor x

Common Outputs
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
  • AUX4: feed-through of RC FLAPS channel
Name
Generic Quadcopter Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4001

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: feed-through of RC AUX1 channel
  • MAIN6: feed-through of RC AUX2 channel
Lumenier QAV-R (raceblade) 5" arms Maintainer: James Goppert <james.goppert@gmail.com>

SYS_AUTOSTART = 4003
Lumenier QAV250 Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4009
DJI F330 w/ DJI ESCs Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4010
DJI F450 w/ DJI ESCs Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4011
S500 Generic Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4014
Holybro S500 Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4015
PX4 Vision DevKit Platform Maintainer: John Doe <john@example.com>

SYS_AUTOSTART = 4016

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
NXP HoverGames Maintainer: Iain Galloway <iain.galloway@nxp.com>

SYS_AUTOSTART = 4017

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
S500 with control allocation Maintainer: Silvan Fuhrer

SYS_AUTOSTART = 4018
3DR Solo Maintainer: Andreas Antener <andreas@uaventure.com>

SYS_AUTOSTART = 4030
3DR DIY Quad Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4031
Generic 250 Racer Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 4050
HolyBro QAV250 Maintainer: Beat Kueng <beat-kueng@gmx.net>

SYS_AUTOSTART = 4052
Holybro Kopis 2 Maintainer: Beat Kueng <beat@px4.io>

SYS_AUTOSTART = 4053
DJI Matrice 100 Maintainer: James Goppert <james.goppert@gmail.com>

SYS_AUTOSTART = 4060
Advanced Technology Labs (ATL) Mantis EDU

SYS_AUTOSTART = 4061

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
UVify IFO Maintainer: Hyon Lim <lim@uvify.com>

SYS_AUTOSTART = 4071

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
UVify Draco Maintainer: Hyon Lim <lim@uvify.com>

SYS_AUTOSTART = 4072

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
UVify IFO Maintainer: Hyon Lim <lim@uvify.com>

SYS_AUTOSTART = 4073

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
ZMR250 Racer Maintainer: Anton Matosov <anton.matosov@gmail.com>

SYS_AUTOSTART = 4080
NanoMind 110 Quad Maintainer: Henry Zhang <zhanghui629@gmail.com>

SYS_AUTOSTART = 4090
Teal One Maintainer: Matt McFadden <matt.mcfadden@tealdrones.com>

SYS_AUTOSTART = 4250

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
COEX Clover 4 Maintainer: Oleg Kalachev <okalachev@gmail.com>

SYS_AUTOSTART = 4500
Crazyflie 2 Maintainer: Dennis Shtatov <densht@gmail.com>

SYS_AUTOSTART = 4900
Crazyflie 2.1 Maintainer: Dennis Shtatov <densht@gmail.com>

SYS_AUTOSTART = 4901

Simulation (Copter)

Name
HIL Quadcopter X Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 1001
SIH Quadcopter X Maintainer: Romain Chiappinelli <romain.chiap@gmail.com>

SYS_AUTOSTART = 1100

Tilt-Quad

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • AUX1: Outer servo motor for rotor 2 arm
  • AUX2: Outer servo motor for rotor 4 arm
  • AUX3: Inner servo motor for rotor 2 arm
  • AUX4: Inner servo motor for rotor 4 arm
Name
Tilt-Quadrotor Maintainer: Ricardo Marques <marques.ricardo17@gmail.com>

SYS_AUTOSTART = 4100

Tricopter Y+

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: yaw servo
Name
Generic Tricopter Y+ Geometry Maintainer: Trent Lukaczyk <aerialhedgehog@gmail.com>

SYS_AUTOSTART = 14001

Tricopter Y-

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: yaw servo
Name
Generic Tricopter Y- Geometry Maintainer: Trent Lukaczyk <aerialhedgehog@gmail.com>

SYS_AUTOSTART = 14002

Plane

Flying Wing

Common Outputs
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
Generic Flying Wing

SYS_AUTOSTART = 3000

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
IO Camflyer Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 3030

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
Phantom FPV Flying Wing Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 3031

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
Skywalker X5 Flying Wing Maintainer: Julian Oes <julian@px4.io>

SYS_AUTOSTART = 3032

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
Wing Wing (aka Z-84) Flying Wing Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 3033

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
FX-79 Buffalo Flying Wing Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 3034

Specific Outputs:

  • MAIN1: right aileron
  • MAIN2: left aileron
  • MAIN4: throttle
Viper Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 3035

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
Sparkle Tech Pigeon Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 3036

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
Modified Parrot Disco Maintainer: Jan Liphardt <JTLiphardt@gmail.com>

SYS_AUTOSTART = 3037

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle
TBS Caipirinha Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 3100

Specific Outputs:

  • MAIN1: left aileron
  • MAIN2: right aileron
  • MAIN4: throttle

Plane A-Tail

Common Outputs
  • MAIN1: aileron right
  • MAIN2: aileron left
  • MAIN3: v-tail right
  • MAIN4: v-tail left
  • MAIN5: throttle
  • MAIN6: wheel
  • MAIN7: flaps right
  • MAIN8: flaps left
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
Applied Aeronautics Albatross Maintainer: Andreas Antener <andreas@uaventure.com>

SYS_AUTOSTART = 2106

Plane V-Tail

Common Outputs
  • MAIN1: aileron right
  • MAIN2: aileron left
  • MAIN3: v-tail right
  • MAIN4: v-tail left
  • MAIN5: throttle
  • MAIN6: wheel
  • MAIN7: flaps right
  • MAIN8: flaps left
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
X-UAV Mini Talon Maintainer: Friedrich Beckmann <friedrich.beckmann@hs-augsburg.de>

SYS_AUTOSTART = 2200

Simulation (Plane)

Common Outputs
  • MAIN1: aileron
  • MAIN2: elevator
  • MAIN3: rudder
  • MAIN4: throttle
  • MAIN5: flaps
  • MAIN6: gear
Name
HILStar (XPlane) Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 1000
SIH plane AERT Maintainer: Romain Chiappinelli <romain.chiap@gmail.com>

SYS_AUTOSTART = 1101

Standard Plane

Common Outputs
  • AUX1: feed-through of RC AUX1 channel
  • AUX2: feed-through of RC AUX2 channel
  • AUX3: feed-through of RC AUX3 channel
Name
Standard Plane Maintainer: Lorenz Meier <lorenz@px4.io>

SYS_AUTOSTART = 2100

Specific Outputs:

  • MAIN1: aileron
  • MAIN2: elevator
  • MAIN3: throttle
  • MAIN4: rudder
  • MAIN5: flaps
  • MAIN6: gear
Bormatec Maja Maintainer: Andreas Antener <andreas@uaventure.com>

SYS_AUTOSTART = 2105

Specific Outputs:

  • MAIN1: aileron
  • MAIN2: aileron
  • MAIN3: elevator
  • MAIN4: rudder
  • MAIN5: throttle
  • MAIN6: wheel
  • MAIN7: flaps

Rover

Rover

Name
Generic Ground Vehicle

SYS_AUTOSTART = 50000

Specific Outputs:

  • MAIN2: steering
  • MAIN4: throttle
Aion Robotics R1 UGV Maintainer: Timothy Scott

SYS_AUTOSTART = 50003

Specific Outputs:

  • MAIN0: Speed of left wheels
  • MAIN1: Speed of right wheels
NXP Cup car: DF Robot GPX Maintainer: Katrin Moritz

SYS_AUTOSTART = 50004

Specific Outputs:

  • MAIN2: Steering servo
  • MAIN3: Speed of left wheels
  • MAIN4: Speed of right wheels

Underwater Robot

Underwater Robot

Name
Generic Underwater Robot

SYS_AUTOSTART = 60000
HippoCampus UUV (Unmanned Underwater Vehicle) Maintainer: Daniel Duecker <daniel.duecker@tuhh.de>

SYS_AUTOSTART = 60001

Vectored 6 DOF UUV

Common Outputs
  • MAIN1: motor 1 CCW, bow starboard horizontal, , propeller CCW
  • MAIN2: motor 2 CCW, bow port horizontal, propeller CCW
  • MAIN3: motor 3 CCW, stern starboard horizontal, propeller CW
  • MAIN4: motor 4 CCW, stern port horizontal, propeller CW
  • MAIN5: motor 5 CCW, bow starboard vertical, propeller CCW
  • MAIN6: motor 6 CCW, bow port vertical, propeller CW
  • MAIN7: motor 7 CCW, stern starboard vertical, propeller CW
  • MAIN8: motor 8 CCW, stern port vertical, propeller CCW
Name
BlueROV2 (Heavy Configuration) Maintainer: Thies Lennart Alff <thies.lennart.alff@tuhh.de>

SYS_AUTOSTART = 60002

VTOL

Standard VTOL

Name
HIL Standard VTOL QuadPlane Maintainer: Roman Bapst <roman@auterion.com>

SYS_AUTOSTART = 1002
Generic Quadplane VTOL

SYS_AUTOSTART = 13000

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • AUX1: Aileron 1
  • AUX2: Aileron 2
  • AUX3: Elevator
  • AUX4: Rudder
  • AUX5: Throttle
Fun Cub Quad VTOL Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 13005

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • AUX1: Aileron 1
  • AUX2: Aileron 2
  • AUX3: Elevator
  • AUX4: Rudder
  • AUX5: Throttle
Generic quad delta VTOL Maintainer: Simon Wilks <simon@uaventure.com>

SYS_AUTOSTART = 13006

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • AUX1: Right elevon
  • AUX2: Left elevon
  • AUX3: Motor
Generic AAVVT v-tail plane airframe with Quad VTOL. Maintainer: Sander Smeets <sander@droneslab.com>

SYS_AUTOSTART = 13007
QuadRanger Maintainer: Sander Smeets <sander@droneslab.com>

SYS_AUTOSTART = 13008
Sparkle Tech Ranger VTOL Maintainer: Andreas Antener <andreas@uaventure.com>

SYS_AUTOSTART = 13009
Vertical Technologies DeltaQuad Maintainer: Sander Smeets <sander@droneslab.com>

SYS_AUTOSTART = 13013

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: Right elevon
  • MAIN6: Left elevon
  • MAIN7: Pusher motor
  • MAIN8: Pusher reverse channel
BabyShark VTOL Maintainer: Silvan Fuhrer <silvan@auterion.com>

SYS_AUTOSTART = 13014

Specific Outputs:

  • MAIN1: Ailerons
  • MAIN2: A-tail left
  • MAIN3: Pusher motor
  • MAIN4: A-tail right
  • MAIN5: motor 1
  • MAIN6: motor 2
  • MAIN7: motor 3
  • MAIN8: motor 4

VTOL Duo Tailsitter

Common Outputs
  • MAIN1: motor right
  • MAIN2: motor left
  • MAIN5: elevon right
  • MAIN6: elevon left
Name
Caipiroshka Duo Tailsitter Maintainer: Roman Bapst <roman@px4.io>

SYS_AUTOSTART = 13001
Generic Tailsitter Maintainer: Roman Bapst <roman@px4.io>

SYS_AUTOSTART = 13200

VTOL Octoplane

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • MAIN5: motor 5
  • MAIN6: motor 6
  • MAIN7: motor 7
  • MAIN8: motor 8
  • AUX1: Aileron 1
  • AUX2: Aileron 2
  • AUX3: Elevator
  • AUX4: Rudder
  • AUX5: Throttle
Name
Generic Octoplane VTOL Maintainer: John Doe <john@example.com>

SYS_AUTOSTART = 13050

VTOL Quad Tailsitter

Common Outputs
  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 4
  • MAIN4: motor 5
  • MAIN5: elevon left
  • MAIN6: elevon right
  • MAIN7: canard surface
  • MAIN8: rudder
Name
Quadrotor X Tailsitter Maintainer: Roman Bapst <roman@px4.io>

SYS_AUTOSTART = 13003
Quadrotor + Tailsitter Maintainer: Roman Bapst <roman@px4.io>

SYS_AUTOSTART = 13004

VTOL Tiltrotor

Name
BirdsEyeView Aerobotics FireFly6 Maintainer: Roman Bapst <roman@uaventure.com>

SYS_AUTOSTART = 13002

Specific Outputs:

  • MAIN1: Front right motor bottom
  • MAIN2: Front right motor top
  • MAIN3: Back motor bottom
  • MAIN4: Back motor top
  • MAIN5: Front left motor bottom
  • MAIN6: Front left motor top
  • AUX1: Tilt servo
  • AUX2: Elevon 1
  • AUX3: Elevon 2
  • AUX4: Gear
CruiseAder Claire Maintainer: Samay Siga <samay_s@icloud.com>

SYS_AUTOSTART = 13010
E-flite Convergence Maintainer: Andreas Antener <andreas@uaventure.com>

SYS_AUTOSTART = 13012

Specific Outputs:

  • MAIN1: Motor right
  • MAIN2: Motor left
  • MAIN3: Motor back
  • MAIN4: empty
  • MAIN5: Tilt servo right
  • MAIN6: Tilt servo left
  • MAIN7: Elevon right
  • MAIN8: Elevon left
Generic Quadplane VTOL Tiltrotor

SYS_AUTOSTART = 13030

Specific Outputs:

  • MAIN1: motor 1
  • MAIN2: motor 2
  • MAIN3: motor 3
  • MAIN4: motor 4
  • AUX1: Motor tilt front left
  • AUX2: Motor tilt front right
  • AUX3: Motor tilt rear left
  • AUX4: Motor tilt rear right
  • AUX5: Aileron left
  • AUX6: Aileron right
  • AUX7: Elevator
  • AUX8: Rudder
Tags: hardware
 airframe readme ⇠